Bucket elevator conveyor system equipment

Bucket elevator is one of the most commonly used lifting equipment with the advantages of high throughput, high lift height and smooth running.When using bucket elevator,the cooperation methods between bucket elevator and upstream equipment should be noticed,please see it as follows:
a.Hand feeding: the material in the bag can be fed into the conveying equipment through the feeding port. 
Advantage:The lifting machine can run normally without material blockage.
Disadvantage: Hand feeding required higher physical strength.

b. Feeding through Bin connected with chute: the feeding method saves human cost. Loading machine and vibration hopper are allowed under available working condition, hopper can store material and also brings buffer function, which will avoid overload problem because of too much material.

c. Common feeding and conveying equipment: belt conveyor, screw conveyor, scraper conveyor and so on.
In addition,if you do not know what equipment is suitable to cooperate with the bucket elevator,please feel free to contact our engineer,we will give you a best solution: http://www.pkmachinery.com/  

Select the bucket elevator What should pay attention to?

Bucket elevator is widely used, the type is an important part of choice. What are the considerations in the selection process of the bucket elevator in it?
1. Taking into account the feed is uneven, uneven material block size and other factors, in selecting hoist, lift amount of margin should be bigger;
2. General bucket elevator tape as an ordinary rope wire rope heat tape and tape, rope tape suitable for general below 80 ℃ materials, heat-resistant wire rope tape applied to below 120 ℃ materials;
3. The bucket elevator has a head housing flange for dust, such as conveying powder materials can be accessed by a large dust collector;
The head of the housing 4. The bucket elevator drive bracket installation and servicing platform, without a separate foundation. Users may need to indicate whether you want to access platform;
5. If the selection please provide the following parameters: the desired height, material type, size, density, temperature, moisture, feeding device name, for indoor or outdoor;
6. delivery Fly - class materials, bucket speed ≤1.3 m / sec, the transmission part an extra design.

What is Cement Bucket Elevator?

How do you usually put cement to a higher place? Lifts?Here we will introduce you a new equipment like lifter,but it is designed to enhance the cement, it has more advantages than lift.Now let us begin!

application of cement bucket elevator

NE type bucket elevator’s traction configuration is plate chain , which is used for vertically transporting powder , granular and block material , and also high grinding material , such as coal powder , slag , limestone , cement raw material , cement clinker , cement , coal , dry clay etc , material temperature is less than 250℃. Max. Lifting height can be 40m .It is special for cement,so we also call it cement bucket elevator.

►Working Principle
    Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chain, on which above or below is a drive sprocket and a divert sprocket. Continuous Chain or Belt Bucket Elevator for Cement are generally equipped with chassis to prevent the dust flying into the bucket elevator.
►Features
    1. Cement bucket elevator machine adopt plate chain, gravity discharge material;
    2. Chain is the superior alloy steel high strength plate chain, wear-resisting and steady.
    3. Adopt several kinds driving group to drive, there are maintains frame and guardrail on driven platform;
    4. There are rail and backstop, to prevent chain swing while running;
    5. There install the anti-return rubber plate at the discharge outlet;
    6. Bottom part has the self-tension device.

►Advantage

    1.Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.

    2.Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials. Sound seal and little circumstance pollution.

    3.Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.

    4.The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials. There is little materials sprinking during feeding and discharging to reduce machinery abrasion.

    5.wide application bucket elevator as one of material handling equipment  is used in powder, graininess and patch delivering upward unpolishing and subpolishing scattered materials whose density is less than 1.5t/m, such as coal, grail, dust coke.

It is easy to operate and installed,so hurry up ang order one,it will bring you much convenience and surprise!If you need one,please provide us the following information:

1. What is the conveying material and its physical characteristics? such as bulk density, feeding size, temperature, mositure content etc.

2. What is the processing capacity of the elevator?

3. What is the lifting height of the elevator (distance between inlet and outlet)? 

PK Mining Machinery Company

 

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation. 

Tel: +86 373 579 9198 

Fax: +86 373 507 1699  

Email: info@pkmachinery.com  

Address: 289 Yellow River Road, Xinxiang City, Henan Province, China