How do you usually put cement to a higher place? Lifts?Here we will introduce you a new equipment like lifter,but it is designed to enhance the cement, it has more advantages than lift.Now let us begin!
 |
| application of cement bucket elevator |
NE
type bucket elevator’s traction configuration is plate chain , which is
used for vertically transporting powder , granular and block material ,
and also high grinding material , such as coal powder , slag , limestone
, cement raw material , cement clinker , cement , coal , dry clay etc ,
material temperature is less than 250℃. Max. Lifting height can be 40m
.It is special for cement,so we also call it cement bucket elevator.
►Working Principle
Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chain, on which above or below is a drive sprocket and a divert sprocket. Continuous Chain or Belt Bucket Elevator for Cement are generally equipped with chassis to prevent the dust flying into the bucket elevator.
►Features
1. Cement bucket elevator machine adopt plate chain, gravity discharge material;
2. Chain is the superior alloy steel high strength plate chain, wear-resisting and steady.
3. Adopt several kinds driving group to drive, there are maintains frame and guardrail on driven platform;
4. There are rail and backstop, to prevent chain swing while running;
5. There install the anti-return rubber plate at the discharge outlet;
6. Bottom part has the self-tension device.
►Advantage
►Working Principle
Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chain, on which above or below is a drive sprocket and a divert sprocket. Continuous Chain or Belt Bucket Elevator for Cement are generally equipped with chassis to prevent the dust flying into the bucket elevator.
►Features
1. Cement bucket elevator machine adopt plate chain, gravity discharge material;
2. Chain is the superior alloy steel high strength plate chain, wear-resisting and steady.
3. Adopt several kinds driving group to drive, there are maintains frame and guardrail on driven platform;
4. There are rail and backstop, to prevent chain swing while running;
5. There install the anti-return rubber plate at the discharge outlet;
6. Bottom part has the self-tension device.
►Advantage
1.Low driving power, inflow feeding, induction unloading, high-volume
hopper intensive arrangement. There is almost no feed back and
excavating circumstance when materials are lifted, so invalid power is
little.
2.Wide lifting range, little materials type and property requirement
can not only lift general powder and granule materials, but also lift
high polishing materials. Sound seal and little circumstance pollution.
3.Good running reliability, the advanced design principle and
handling method assure reliability of whole machine running, the
non-fault time exceed 20 thousand hours. Stable running make it reach
higher lifting height.
4.The life is long, inflow feeding, non excavating with hopper and
there is few extrusion and collision circumstance between materials.
There is little materials sprinking during feeding and discharging to
reduce machinery abrasion.
5.wide application bucket elevator as one of material handling
equipment is used in powder, graininess and patch delivering upward
unpolishing and subpolishing scattered materials whose density is less
than 1.5t/m, such as coal, grail, dust coke.
It is easy to operate and installed,so hurry up ang order one,it will bring you much convenience and surprise!If you need one,please provide us the following information:
1. What is the conveying material and its physical characteristics?
such as bulk density, feeding size, temperature, mositure content etc.
2. What is the processing capacity of the elevator?
3. What is the lifting height of the elevator (distance between inlet and outlet)?
 |
| PK Mining Machinery Company |
Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation.
Tel: +86 373 579 9198
Fax: +86 373 507 1699
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China
没有评论:
发表评论