Introduction of Silo Bucket Elevator

Customer reference list

CUSTOMER REFERENCE LIST (YEAR 2012-2014)
NO.	EQUIPMENT	VENDOR'S SCOPE OF SUPPLY
		PROJECT LOCATION	QUANTITY	TIME
15	Bucket Elevator	Russia	1 Set	20121119
22	Bucket Elevator	Russia	4 Set	20130516
31	Bucket Elevator	Yemen	1 Set	20131200
35	Bucket Elevator	Philippines	2 Sets	20140304
39	Bucket Elevator	Mauritius	1 Set	20140500
44	Bucket Elevator	Thailand	1 Set	20140723
53	Bucket Elevator	Australia	3 Sets	20140220

►Brief introduction:
TZD bucket elevator is a kind of bucket elevator special for silo. Silo bucket elevator is special adapt to lifting material that in small size and ρ< 1 t/m³.There are two kinds of buckets for it, one is made by steel, the other one is made by plastic.
►Working principle
    Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chain, on which above or below is a drive sprocket and a divert sprocket. Continuous Chain or Belt Bucket Elevator for Cement are generally equipped with chassis to prevent the dust flying into the bucket elevator.
► Features:
    1. Obvious features like low power required, effective inflow feeding & guiding discharge, huge-volume hopper with tight arrangement. With little returned material or dug-out material, the ineffective power resulted is quite less as well accordingly.
    2. It has vast range of application with almost no limitation for lifting material forms and properties. Materials like power, grain or big lump could be all applicable .Also its good sealing condition could effectively reduces the environmental pollution.
   3. Advanced design & reliable manufacturing way have greatly ensured the overall machine.
   4. Stability & higher lifting height.
► Applications:  
TZD bucket elevator is widely used for conveying powder, granular and non-small-block mill and grinding of small materials, such as: coal, cement, stones, sand, clay, ore and so on. 

silo bucket elevator

► Selection condition:  
    1. What is the conveying material and its physical characteristics? such as bulk density, feeding size, temperature, mositure content etc.
    2. What is the processing capacity of the elevator?
    3. What is the lifting height of the elevator (distance between inlet and outlet)?   

What is Cement Bucket Elevator?

How do you usually put cement to a higher place? Lifts?Here we will introduce you a new equipment like lifter,but it is designed to enhance the cement, it has more advantages than lift.Now let us begin!

application of cement bucket elevator

NE type bucket elevator’s traction configuration is plate chain , which is used for vertically transporting powder , granular and block material , and also high grinding material , such as coal powder , slag , limestone , cement raw material , cement clinker , cement , coal , dry clay etc , material temperature is less than 250℃. Max. Lifting height can be 40m .It is special for cement,so we also call it cement bucket elevator.

►Working Principle
    Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chain, on which above or below is a drive sprocket and a divert sprocket. Continuous Chain or Belt Bucket Elevator for Cement are generally equipped with chassis to prevent the dust flying into the bucket elevator.
►Features
    1. Cement bucket elevator machine adopt plate chain, gravity discharge material;
    2. Chain is the superior alloy steel high strength plate chain, wear-resisting and steady.
    3. Adopt several kinds driving group to drive, there are maintains frame and guardrail on driven platform;
    4. There are rail and backstop, to prevent chain swing while running;
    5. There install the anti-return rubber plate at the discharge outlet;
    6. Bottom part has the self-tension device.

►Advantage

    1.Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.

    2.Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials. Sound seal and little circumstance pollution.

    3.Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.

    4.The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials. There is little materials sprinking during feeding and discharging to reduce machinery abrasion.

    5.wide application bucket elevator as one of material handling equipment  is used in powder, graininess and patch delivering upward unpolishing and subpolishing scattered materials whose density is less than 1.5t/m, such as coal, grail, dust coke.

It is easy to operate and installed,so hurry up ang order one,it will bring you much convenience and surprise!If you need one,please provide us the following information:

1. What is the conveying material and its physical characteristics? such as bulk density, feeding size, temperature, mositure content etc.

2. What is the processing capacity of the elevator?

3. What is the lifting height of the elevator (distance between inlet and outlet)? 

PK Mining Machinery Company

 

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation. 

Tel: +86 373 579 9198 

Fax: +86 373 507 1699  

Email: info@pkmachinery.com  

Address: 289 Yellow River Road, Xinxiang City, Henan Province, China

Plate Chain Bucket Elevator Introduction

TB Plate Chain Gravel Bucket Elevator has an opening bin below for storing material, when the motor driving the endless chain (chain or belt) through the chute, the hopper fixed in the chain of plate (chain or belt) bring the material to the discharging opening, in this way it continuously convey the material.

     It adopts plate sleeve roller chain as the traction components , gravity type discharge material. Apply to middle, big block etc grinding material, which density is less than 2t/m3. Material temperature is less than 250℃ , capacity can reach 395m3/h , lifting height is approx. 5~50m . Vertical bucket elevator are highly resistant to wear and can be placed indoor as well as outdoor.

plate chain bucket elevator

►Working principle 
Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chain, on which above or below is a drive sprocket and a divert sprocket. Continuous Chain or Belt Bucket Elevator for Cement are generally equipped with chassis to prevent the dust flying into the bucket elevator.

bucket elevator

►Features
    1,Application widely, not only lifting the common powder, granular and block material, but also lifting the high grinding material;
    2,Low driving power, low energy consumption, energy conservation;
    3,For lifting same material, energy consumption is 1/3~1/2 compared with the link chain bucket elevator;
    4,The whole machine with full sealed design, no dust pollution while running;
    5,The machine housing case adopt embossing structure, better stiffness, high precision, good-looking appearance;

bucket elevator

►Advantage     
    1.Bucket elevator machine applys to powder, granular, lump material, the density is less than 1.5t/m3
    2.Material temperature is less than 60 ℃, if adopt heat-resistance rubber belt, the material temperature is less than 200 ℃
    3.Driven device configuration could save much space, light weight, with backstop, low noise, running steady.
    4.4 kinds bucket type could meet different particle sizes material.
    5.Customized lifting height.
►Selection condition
    1. What is the conveying material and its physical characteristics? such as bulk density, feeding size, temperature, mositure content etc.
    2. What is the processing capacity of the elevator?
    3. What is the lifting height of the elevator (distance between inlet and outlet)?  
 

PK Mining Machinery Company

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation. 

Tel: +86 373 579 9198 

Fax: +86 373 507 1699  

Email: info@pkmachinery.com  

Address: 289 Yellow River Road, Xinxiang City, Henan Province, China

Cement Bucket Elevator Introduction

NE type bucket elevator’s traction configuration is plate chain , which is used for vertically transporting powder , granular and block material , and also high grinding material , such as coal powder , slag , limestone , cement raw material , cement clinker , cement , coal , dry clay etc , material temperature is less than 250℃. Max. Lifting height can be 40m .It is special for cement,so we also call it cement bucket elevator.
►Working Principle
    Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chain, on which above or below is a drive sprocket and a divert sprocket. Continuous Chain or Belt Bucket Elevator for Cement are generally equipped with chassis to prevent the dust flying into the bucket elevator.

NE bucket elevator

►Features
    1. Cement bucket elevator machine adopt plate chain, gravity discharge material;
    2. Chain is the superior alloy steel high strength plate chain, wear-resisting and steady.
    3. Adopt several kinds driving group to drive, there are maintains frame and guardrail on driven platform;
    4. There are rail and backstop, to prevent chain swing while running;
    5. There install the anti-return rubber plate at the discharge outlet;
    6. Bottom part has the self-tension device.
►Advantage

    1.Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.

    2.Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials. Sound seal and little circumstance pollution.

    3.Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.

    4.The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials. There is little materials sprinking during feeding and discharging to reduce machinery abrasion.

    5.wide application bucket elevator as one of material handling equipment  is used in powder, graininess and patch delivering upward unpolishing and subpolishing scattered materials whose density is less than 1.5t/m, such as coal, grail, dust coke.

cement bucket elevator

►Selection condition

    1. What is the conveying material and its physical characteristics? such as bulk density, feeding size, temperature, mositure content etc.

    2. What is the processing capacity of the elevator?

    3. What is the lifting height of the elevator (distance between inlet and outlet)?  

PK Mining Machinery Company

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation. 

Tel: +86 373 579 9198 

Fax: +86 373 507 1699  

Email: info@pkmachinery.com  

Address: 289 Yellow River Road, Xinxiang City, Henan Province, China