5 Ways to Solve Bucket Elevator Ash Leakage

(1) Whole Casing flange gasket of bucket elevator damages or no flange gasket, please change new gasket, glue with the sealing glue, retighten the flange bolts.
(2) If material leaks from the head section and bottom base gap, please add a gasket or sealant.
(3) If altitude difference is too large, it will increase material feeding pressure, please change the material feeding method, add a feeding buffer device.
(4) Drive chain occurs idle rotation, please adjust the chain length. 

(5) Casing installation is not straight, please adjust perpendicularity of the casing length. 

Bucket elevator conveyor system equipment

Bucket elevator is one of the most commonly used lifting equipment with the advantages of high throughput, high lift height and smooth running.When using bucket elevator,the cooperation methods between bucket elevator and upstream equipment should be noticed,please see it as follows:
a.Hand feeding: the material in the bag can be fed into the conveying equipment through the feeding port. 
Advantage:The lifting machine can run normally without material blockage.
Disadvantage: Hand feeding required higher physical strength.

b. Feeding through Bin connected with chute: the feeding method saves human cost. Loading machine and vibration hopper are allowed under available working condition, hopper can store material and also brings buffer function, which will avoid overload problem because of too much material.

c. Common feeding and conveying equipment: belt conveyor, screw conveyor, scraper conveyor and so on.
In addition,if you do not know what equipment is suitable to cooperate with the bucket elevator,please feel free to contact our engineer,we will give you a best solution: http://www.pkmachinery.com/  

Do You Really Know the Safe Installation of Bucket Elevator

1.The bucket elevator must be securely mounted on a solid concrete foundation. Concrete foundation surface should be flat and present as a horizontal state to ensure well-installed bucket elevator can achieve vertical requirements. Middle and upper casing section of a higher height bucket elevator should be connected with the neighbouring buildings in order to increase its stability. Firstly, please install the lower part, fix the anchor bolt, and then install the middle casing and upper casing. After complete the installation, please adjust and correct the vertical height, upper and lower shaft should be parallel to each other, and shafts should be in the same plane. When install the bucket elevator with a lower height , you can connect the upper ,middle and lower casing well first on the ground, and then hang the complete set vertically and fix it on the concrete foundation.

 

2. After completing the installation of casing, you can install the chain and bucket. The u-shape screw which is used for connect the buckets, it is not only a chain connector, but also a fixture of buckets. U-screw nuts must be tighten and locked securely, after the installation of chain and bucket, please adjust it to get a proper tension.
3.Add the appropriate amount of oil or grease in the gearbox and bearing respectively, reducer should be lubricated with industrial gear oil, bearing seat can be lubricated with calcium or sodium base grease.