 |
| ring chain bucket elevator |
| CUSTOMER REFERENCE LIST (YEAR 2012-2014) | ||||
| NO. | EQUIPMENT | VENDOR'S SCOPE OF SUPPLY | ||
| PROJECT LOCATION | QUANTITY | TIME | ||
| 15 | Bucket Elevator | Russia | 1 Set | 20121119 |
| 22 | Bucket Elevator | Russia | 4 Set | 20130516 |
| 31 | Bucket Elevator | Yemen | 1 Set | 20131200 |
| 35 | Bucket Elevator | Philippines | 2 Sets | 20140304 |
| 39 | Bucket Elevator | Mauritius | 1 Set | 20140500 |
| 44 | Bucket Elevator | Thailand | 1 Set | 20140723 |
| 53 | Bucket Elevator | Australia | 3 Sets | 20140220 |
►Introduction
Bucket elevator is designed to
transport powder, granular and lump materials, which also can lift
abrasive materials, such as fly ash, slag, limestone, cement slurry,
cement clinker, cement, coal, dry clay, etc., it has an opening bin
below for storing material, when the motor driving the endless plate
chain (chain or belt) through the chute, the hopper fixed in the chain
of plate (chain or belt) bring the material to the discharging opening,
in this way it continuously convey the material.
Ring chain Bucket Elevator is applied in the vertical conveying of
abrasive powder, granular and small lump materials, such as grain, coal,
cement and crushed ore, etc., and its transportation height can reach
to 40m. The bucket chains are characterized by simple structure, stable
operation and hybrid or gravity discharge. The wheel rim uses
combination sprocket, and it is easy to replace and has been specially
treated to ensure a long service life. The underpart is equipped by
gravity automatic tensioning device, so that it can maintain a constant
tension to avoid slipping off the chain. The material temperature can
not exceed 250 °C.►Features
1. Ring chain bucket elevator with large capacity, high lifting height, running steady, long service life etc advantage;
2.Adopt wrought link chain as the traction components.
3.The outline dimension of cross section is little, installation arrange compact, save space;
4.High lifting height, with better sealing.
5.Customized capacity, height, material and surface treating etc processing technology.
►Advantage
1. Excellent sealing, less environmental pollution.
2. Easy Operation and maintenance, less wearing parts.
3. Energy conservation and less maintenance ensure the machine a very low cost.
4. Advanced design principle has ensured the reliability of machine operation.
5. High accuracy. The housing case is of good rigidity and beautiful
appearance by the edge folding and intermediate beading.
6. Small size. Compared with other machines which have the same lifting capacity, size of this machine is smaller.
7. Transmission capacity. The series hoist NE15 ~ NE800 a variety of
specifications. Enhance the volume range of 15 to 800m3 / h.
►Working Principle
Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chain, on which above or below is a drive sprocket and a divert sprocket. Continuous Chain or Belt Bucket Elevator for Cement are generally equipped with chassis to prevent the dust flying into the bucket elevator.
►Application
TH series bucket elevator is widely used for transporting material, the density is less than 1.5t/m3, easy to draw out powder, granular, block etc low grinding material. Round link chain bucket elevators are the preferred conveying systems for the transport of hot bulk materials and coarse-grained materials. Such as coal, cement, gravel, sand, fertilizer, grain etc.
►Selection condition
1. What is the conveying material and its physical characteristics? such as bulk density, feeding size, temperature, mositure content etc.
2. What is the processing capacity of the elevator?
3. What is the lifting height of the elevator (distance between inlet and outlet)?
