Efficient Bucket Elevator Introduction

CUSTOMER REFERENCE LIST (YEAR 2012-2014)
NO.	EQUIPMENT	VENDOR'S SCOPE OF SUPPLY
		PROJECT LOCATION	QUANTITY	TIME
15	Bucket Elevator	Russia	1 Set	20121119
22	Bucket Elevator	Russia	4 Set	20130516
31	Bucket Elevator	Yemen	1 Set	20131200
35	Bucket Elevator	Philippines	2 Sets	20140304
39	Bucket Elevator	Mauritius	1 Set	20140500
44	Bucket Elevator	Thailand	1 Set	20140723
53	Bucket Elevator	Australia	3 Sets	20140220

►Introduction
    General rubber belt is suitable for material temperature less than 80 ℃ ,heat-resisting rubber belt is suitable for material temperature less than 120 ℃. Max. Lifting height 80m , Capacity is approx. 2080 m3/h.
    THG bucket elevator adopts high strength link chain as the traction component , draw our type feeding material , centrifugal or hybrid discharge material . Material temperature is less than 250℃. Max. lifting height 75m , Capacity is approx.1800m3/h.

►Working principle
Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chain, on which above or below is a drive sprocket and a divert sprocket. Continuous Chain or Belt Bucket Elevator for Cement are generally equipped with chassis to prevent the dust flying into the bucket elevator.

►Application
    TDG/THG bucket elevator with Sh type buckets are widely used in transporting dry , loose and good fluidity powder , granular , block material ; with Zh type buckets are widely used in transporting moist , caking and bad fluidity powder , granular material .

►Features
    1. Efficient bucket elevator machine with large capacity, high lifting height;
    2. Suitable bucket type, large volume;
    3. Link chain adopt alloy steel, after surface treating and heat treating, moderate hardness, high strength, better abrasive resistance;
    4. Adopt steel cord weaving rubber belt, good toughness, high strength;
    5. Head, tail parts and middle housing cases with good sealing, no material and dust leaked, with no pollution.
    6. Driven device adopt vertical shaft gearbox and fluid coupling, and also with backstop device. Make running steady;
    7. Bottom adopts counter weight tension device, make itself automatic take-up, to avoid belt track slip and chain take off;
    8. Increase speed control sensor and mechanical level detector, It is matched by customized.